BC Rich Outlaw PX3 - Shown in Gun Metal
Buy Today & We'll Throw In The Following Free Gifts:Korg GA-30 Tuner + BC Rich Gig BagThis is a limited time offer so please act quickly!
Outlaw PX3
With mean Rockfield Mafia pickups, hollowpoint inlays on the neck and custom revolver knobs, the PX3 is a serious gun for hire!
Bolt-on Construction
A number of B.C. Rich guitars use a classic Bolt-on construction. On these instruments a neck (typically maple) is bolted on with 4 screws to the body. This construction offers some added flexibility in the instruments adjustment and provides the option to change the neck in the future.
Rockfield Pickups - Mafia
BC Rich guitars called and asked us, "We like the turbo series but can you do them with a ceramic magnet also?" We replied, "That's a great Idea! Sure we can, but you have got to use them in everything!" (We didn't win that battle but it was worth a shot) The use of a ceramic magnet gives any pickup extra power due to the increased magnetic field that they provide. This feature makes the mafia pickups produce a hotter and thicker tone that's really aggressive and full. The increased low end and thick mids and in your face highs is what rock and roll was built on! Balanced and full of sustain this pickup is a great representation of its namesake, a truly intimidating killer.
We wanted to make sure the neck version of the mafia pickup was just as full sounding as the bridge position. We wanted to do this without taking away from what we had already accomplished. So we again we went into the wood shed and made very minor modifications to the overall design and design concept of this pickup. When we came out we were confident that the Mafia neck pickup had that punchy bold tone with the same aggressive characteristics as the bridge version. A tad brighter with a little less output really takes this pickup into the smooth and warm realm of the tonal spectrum. All while maintaining that balanced bite and in your face aggressive tone that the mafia is known for!
Deep Arched Top
A deep arched top is used on several B.C. Rich models. The deep arch is achieved by increasing the body center by approximately 5/8" and then gently sloping the arch toward the side of the instrument and leveling out just as the slope reaches the edge. A deep arch top when applied to a B.C. Rich shape gives an air of elegance and sophistication. Many of the B.C. Rich Handcrafted instruments are requested with a deep arch top style. This year B.C. Rich is offering more deep arch tops in their production models in a variety of shapes and colors.
Specifications:
- Construction: bolt on
- Body wood: basswood
- Body thickness: 45mm
- Top style: deep arched
- Body binding: no
- Headstock style: small traditional 3 to a side
- Headstock color: painted to match
- Headstock binding: no
- Tuners: B.C. Rich diecast
- Neck wood: maple
- Back of neck: satin natural
- Neck binding: no
- Neck profile: thin
- Neck thickness at fret 1: 19mm
- Neck thickness at fret 12: 21mm
- Neck radius: 430mm
- Fretboard: rosewood
- Inlay: Hollowpoint circles
- Frets: 24 jumbo 2.7mm
- Factory strings: 9 - 46
- Scale: 25 1/2"
- Bridge type: Tune o matic
- Tailpiece type: string through
- Pickups: 2 black Rockfield mafia humbuckers
- Controls: 1 volume, 1 three-way toggle and 1 tone (the tone knob is a push/pull that acts as a coil tap. It taps out the two outer coils of each pickup.)
- Hardware: black chrome
- Special features: two end of body strap buttons for a custom strap fit and instrument positioning, revolver knobs
- Finish: painted glossy
- Color: gun metal or onyx
Buy Today & We'll Throw In The Following Free Gifts:Korg GA-30 Tuner + BC Rich Gig BagThis is a limited time offer so please act quickly!
Guitar Shown in Gun Metal
Get Your BC Rich Outlaw PX3 Today!
