Crate VTX200SH

Crate VTX200SH

Crate VTX200SH Description:

VTX200SH is a stereo head version of our VTX200S combo. Its three-channel operation offers supreme tonal flexibility. Channel 1's low-gain FlexWave Evolution 5™ preamp gives you everything from sparkling clean tones to smooth and gentle distortion. Channel 2's medium-gain is just a tap of the included footswitch away and boasts a little more distortion and crunch.

If you want full-on distortion and sustain switch to Channel 3 for the ultimate in grind. All three channels feature Crate's 3-band EQ for tweaking in the most subtle or dynamic tonal characteristics you want.

The amplifier section pushes 100 watts per side, per channel. Stereo includes Chorus, Flange, Phase Shift, Vibrato, Octave Down, Touch-Wah and Reverse Wah. Each of these can be set for depth, and you can use the Tap button on the front panel (or on the included 4-button footswitch) to set the speed. Finally, twin top-mounted leather handles make it easy to move around.

The powerful VTX200SH stereo head was designed for the true tone connoisseur.

Crate VTX200SH Features:

• Stereo amplifier head
• 200 watts RMS (100 watts per side)
• 3 independent channels with gain, level and 3-band EQ
• Top mounted leather handles
• 4-button footswitch included

Crate VTX200SH Specifications:

• Output Power Rating:
• 70W per channel @5% THD, 8 ohm load
• 100W per channel @5% THD, 4 ohm load
• Maximum Input Signal Accepted: 5 volts peak-to-peak min. @ 1kHz
• Total System Gain:
• Ch 1 74dB, all controls @10
• Ch 2 88dB, all controls @10
• Ch 3 103dB, all controls @10
• Channel 1
• Low Control 26dB range @ 70Hz
• Mid Control 10dB range @ 900Hz
• High Control 20dB range @ 10kHz
• Channel 2
• Low Control 26dB range @ 70Hz
• Mid Control 10dB range @ 900Hz
• High Control 20dB range @ 10kHz
• Channel 3
• Low Control 17dB range @ 100Hz
• Mid Control 16dB range @ 1kHz
• High Control 12dB range @ 7kHz
• Input Impedance 470k
• Power Requirements: 120 VAC, 60Hz

Get your Crate VTX200SH today!