EAW AX366
EAW AX366 Description:
3-way full range installation loudspeaker
The AX366 has a horn pattern of 60° x 60°. All AX enclosures, including the companion AX122 subwoofer, have an identically sized, dual trapezoidal shape.
This permits creating horizontally or vertically orientated arrays in a variety of beamwidths, with the AX's superior horizontal and vertical pattern symmetry maintaining the proper relationship between the polar patterns.
A set of 3/8-16 threaded mounting points facilitate installation.
Single-amp and bi-amp operating modes are user-selectable. In single-amp mode, the passive crossover is designed to work with a digital signal processor (DSP).
This reduces the crossover's complexity, minimizes power losses, and provides more sophisticated digital processing to maximize performance.
The AX Series features a newly-designed, coaxial transducer with high efficiency, MF cone and HF compression drivers.
The drivers share a common, neodymium magnet allowing closely spaced voice coils.
This minimizes the distance between the MF and HF acoustic origins for highly coherent sound both on and off axis.
The MF's sealed, aluminum chassis acts as a heat sink for the entire assembly.
The MF/HF transducer loads into a large, common horn via a modified version of the EAW's patented Radial Phase Plug™.
A unique HF waveguide is integrated within the center of the phase plug.
It is acoustically transparaent to the MF energy while being acoustically opaque to and acting as a waveguide for the HF energy.
The low frequencies are reproduced by a pair of spaced, 12-inch cone drivers.
This LF subsystem maintains the overall coaxial design as its acoustic origin is along the acoustic axis of the MF/HF subsystem.
In addition, the LF driver spacing provides better pattern control than systems of similar size that use a single LF driver.
The companion AX122 subwoofer is designed to extend the low frequency response of the AX full-range loudspeakers.
With an identically-sized enclosure, the AX122 arrays perfectly with the AX full-range loudspeakers.
Six year warranty.
EAW AX366 Features:
- Concentric Summation Array (CSA™)
- 3-way full range coaxial transducer
- Single amp and bi-amp operating modes are user selectable.
- The nominal beamwidth is 60 ° x 60°
- Low frequencies are reproduced by a pair of spaced 12in cone drivers.
Appplications:
The AX Series can be used for many types of installations including, but not limited to Concert Halls, Houses of Worship, Arenas, Large Ballrooms, Live Theater Productions, Gymnasiums, and many others.
EAW AX366 Specifications:
Configuration
- Subsystem Transducer Loading
- LF 2x 12 inch cone Phase Aligned™
- MF 1x 8 inch cone Horn-loaded w/Radial Phase Plug™
- HF 1x 1.4 inch exit, 2.5 inch voice coil compression driver Horn-loaded w/Radial Phase Plug™
- Operating Mode Amplifier Channels External Signal Processing
- Single-amp: LF/MF/HF DSP
- Bi-amp: LF/MF/HF DSP w/2-way filters
Performance
- Operating Range 68 Hz to 20 kHz
- Nominal Beamwidth
- (rotatable)
- Horizontal Vertical
- 60° 60°
- Axial Sensitivity
- (whole space SPL)
- LF/MF/HF: 102 dB 68 Hz to 20kHz
- LF: 103 dB 68 Hz to 335Hz
- MF/HF: 104 dB 275 Hz to 20kHz
- Input Impedance(ohms) Nominal Minimum
- LF/MF/HF: 8 6.3 @ 95 Hz
- LF: 8 7.9 @ 165 Hz
- MF/HF: 8 6.9 @ 590 Hz
- High Pass Filter =>40 Hz , 24 dB/octave Butterworth
- Accelerated Life Test
- LF/MF/HF 80V 800W @ 8 ohm
- LF 89 V 1000 W @ 8 ohm
- MF/HF 49 V 300 W @ 8 ohm
- Calculated Axial Output Limit Average Peak
- LF/MF/HF 131 dB 137 dB
- LF 133 dB 139 dB
- MF/HF 128 dB 134 dB
Get your EAW AX366 today!
