AKG C680BL
AKG C680BL Description:
The C 680 BL is a cost-efficient tabletop microphone for inconspicuous installation.
The transducer shock mount minimizes knocking noise pickup from the table.
The supplied strip of special adhesive tape allows you to fix the microphone temporarily on a table without staining the table or leaving any residue after removal.
Preferred uses include conferencing, lectern, or places of worship
AKG C680BL Features:
- Small and inconspicuous boundary layer microphone
- Shock mounted transducer
- Cardioid polar pattern
- Easy to repaint
- Integrated phantom power adapter
AKG C680BL Specifications:
- Polar pattern cardioid
- Frequency range 60 to 20,000 Hz
- Sensitivity 30 mV/Pa (-30 dBV)
- Max. SPL 115 dB (k=1 %)
- Equivalent noise level 27 dB-A
- Signal/noise ratio (A-weighted) 67 dB
- Impedance 200 ohms
- Recommended load impedance >2000 ohms
- Supply voltage 9 to 52 V phantom power to DIN/IEC
- Current consumption <2 mA
- Connector 3-pin XLR
- Cable 3 m (10 ft.)
- Finish matte black
- Dimensions 97 x 67 x 20 mm (3.9 x 2.6 x 0.8 in.)
- Net weight 100 g (3.5 oz.)
- Shipping weight 400 g (14 oz.)
- The boundary layer microphone shall have a hypercardioid pattern and shall fit within a rectangular envelope given by: 97 x 67 x 20 mm (3.9 x 2.6 x 0.8 in.).
- The sensitivity shall be no lower than 30 mV/Pa, and total harmonic distortion (THD) at an operating level of 115 dB shall be no greater than 1 %.
- The equivalent noise level shall be no greater than 27 dB-A. The frequency response shall be flat from 60-20,000 Hz.
- The microphone shall operate on phantom power over the range from 9 to 52 volts dc. Net/shipping weight: 100/400 g (3.5/14.1 oz.).
Get your AKG C680BL today!
