Crown CTS 4200A
Crown CTS 4200A Description:
Crown CTs 4200a 4-Channels Power Amplifier, 520-Watts at 8-Ohms in Mono and 260-Watts at 4-Ohms in Dual Power Load, 70-Volts, AB+B Circuitry, Barrier Block Input Connectors, Variable Fans, 3U-Chassis.
Crown CTs 4200a model is ordered with the networking option can connect to a 100 Mbps Ethernet network using standard Ethernet hardware (switches, Network Interface Cards, and cables) allowing them to be remotely controlled and monitored via Harman Pro System Architect software. In addition, real-time digital audio can be transported over the same Ethernet network via CobraNet™, providing a simple-to-install, single-plug solution for audio distribution, control, and monitoring.
Crown CTS 4200A Features:
- High power-density, with four channels (CTs 4200).
- Selectable constant-voltage (70V/100V) or low-impedance (4/8 ohm) operation for each channel pair.
- FIT (Fault Isolation Topology) circuitry isolates faults within affected channels.
- Proven Crown AB+B Multi-Mode® output topology.
- Continuously-variable fans optimize cooling efficiency.
- Blue Power Indicator fl ashes if the amplifier shuts off due to an under/over voltage condition
- on the AC mains.
Crown CTS 4200A Specifications:
- Product Type Power Amplifier
- Frequency Response(at 1 watt, 20 Hz - 20 kHz) ± 0.5 dB
- Phase Response (at 1 watt, 10 Hz - 20 kHz) ± 35°
- Signal to Noise Ratio 100 dB
- Total Harmonic Distortion (THD) < 0.05%
- Damping Factor >180
- Maximum Input Level + 20 dBu
- Dual Mode Specifications
- 4 Channels Driven 1 kHz
- 4-ohm (per ch.) 260W
- 8-ohm (per ch.) 200W
- 70V (per ch.) 220W
- 4 Channels Driven 20 Hz-20 kHz
- 4-ohm (per ch.) 215W
- 8-ohm (per ch.) 190W
- 70V (per ch.) 220W
- 1 Channel Driven 1 kHz
- 4-ohm (per ch.) 270W
- 8-ohm (per ch.) 220W
- 70V (per ch.) 250W
- 1 Channel Driven 20 Hz-20 kHz
- 4-ohm (per ch.) 225W
- 8-ohm (per ch.) 210W
- 70V (per ch.) 245W
- Bridge-Mono Mode Specifications
- 2 Channel-Pairs Driven 1 kHz
- 8-ohm (per ch. pair) 520W
- 16-ohm (per ch. pair) 400W
- 100V (per ch. pair) 220W
- 2 Channel-Pairs Driven 20 Hz-20 kHz
- 8-ohm (per ch. pair) 430W
- 16-ohm (per ch. pair) 380W
- 100V (per ch. pair) 220W
- 1 Channel-Pair Driven 1 kHz
- 8-ohm (per ch. pair) 560W
- 16-ohm (per ch. pair) 440W
- 100V (per ch. pair) 250W
- 1 Channel-Pair Driven 20 Hz-20 kHz
- 8-ohm (per ch. pair) 450W
- 16-ohm (per ch. pair) 420W
- 100V (per ch. pair) 245W
- Net Weight 27 lb (12.5 kg)
- Shipping Weight 32 lb (14.5 kg)
- Dimensions (W x H x D) 19 x 3.5 x 16.25 inch
Get your Crown CTS 4200A product today!
