EAW SB1002 Black
EAW SB1002 Black Description:
Subwoofers EAW SB - this excellent equipment designed for the most demanding professional applications.
The wide range of capabilities and provides a choice of size, which is required to meet the requirements of specific applications. Fine emitters designed EAW, with the highest radiated power and the best acoustics for these design parameters. All models SB - devices that direct radiation to optimally configured with a curved shells. Subwoofers SB ideal when absolutely necessary best acoustics, the highest reliability and the most solid physical design.
Model SB1002 - sabvufernaya system is a large format with a high low power, which can be installed or suspend using the integrated system installation that allows the use of this system in various concert shooting systems and permanent installations. Two 18 - inch radiator with a conical diffuser provide flat sounding, construction installation emitters maximizes the area of the diffuser and minimize the front zone acoustics. That is why the acoustic characteristics and the physical configuration of the system most suited to the creation of large sabvufernyh arrays. Used emitters are specifically designed for system SB1002, they have a very large (4.5 - inch) coil sound, as well as powerful neodymium magnetic systems to reduce total weight.
SB1002 model is designed for use digital signal processing to allow optimizing specifications for the low frequency sound. To ensure the right boundary of the sound frequencies and are encouraged to use processors EAW UX and MX series.
System installation, used in such popular series of linear arrays KF760, provides quick and easy to use dvuhtochechnoe consolidation, which allows podveshivaemyh in arrays of up to 12 modules SB1002. The handle on the rear edge of the upper shell SB1002 provides additional administration and the possibility of "Operation pull - Tolkai" in the process of suspension modules.
Data subwoofer can be used in big clubs with live music and dance, religious institutions, in the Performing Arts Center, at corporate events and concert tours.
Subwoofer with two 18 - inch emitters
EAW SB1002 Black Specifications:
- Subsystem
- SUB Load Converter
- Two 18 - inch cone with a cone Fazoinvertor
- Operating hours
- Channels amplifier
- The external signal
- One amplifier LF1/LF2
- DSP with 1 - band filter
- Two amplifier LF1, LF2
- DSP with 1 - band filter
- Performance characteristics
- Repeatable frequency range 28 Hz - 160 Hz
- Nominal width radiation
- Yaw: 360°
- Vertical: 360°
- Axle sensitivity (SPL)
- LF1/LF2 (all space) 95 dB 28 Hz - 160 Hz
- (half) 101 dB 28 Hz - 160 Hz
- Full input resistance (ohms)
- Nominal Minimum
- LF1/LF2 4
- 3.8 to 30 Hz
- LF1, LF2
- 8 (each) 7.5 to 30 Hz (each)
- Filter upper frequency 30 Hz, 12 dB at octave
- The accelerated durability test
- System V LF1/LF2 98
- 2400 W at 4 ohms
- LF1 system, LF2
- In 98 (each) 1200 Watts into 8 ohms (each)
- Reformer (AES)
- 1200 W (each)
- Estimated limit axial radiated power (SPL for the whole space)
- Average
- Pique
- LF1/LF2 (all space)
- 129 dB
- 135 dB
- (half)
- 135 dB
- 141 dB
Get your EAW SB1002 Black today!