Tannoy Reveal 6

Tannoy Reveal 6

Tannoy Reveal 6 Description:

The new Tannoy Reveal 6 near field monitoring speaker is built upon the success and recording industry reputation of the famous original Tannoy Reveal. When launched in the mid nineties, the Reveal was widely recognized as the product that defined the category, and has been the monitor of choice for thousands of amateur and professional recording facilities worldwide.

The original Reveal model was well renowned for its rigid cabinet and substantial baffle. With the new Reveal models, the cabinets have been further braced and refined to provide the most rigid platform possible for the new driver designs. Securely attached to the solid baffle, with no less than 10 hex socket countersunk-head screws, an all-new bass driver performs with significantly reduced distortion. Magnetic circuit flux control rings and extensive Klippell™ based symmetry analysis has made this performance improvement possible and the new driver provides tight, punchy and controlled bass response with a clean and open mid range for superb vocal intelligibility.

The open and detailed reproduction of mid-high frequencies is further enhanced with the inclusion of the Tannoy WideBand™ high frequency unit to improve and extend the high frequency phase response. This ensures increased tonal accuracy of individual instruments in the reproduction process - a mix critical factor allowing the best EQ and placement decisions to be made.

The new model provides greater bandwidth, significantly lower levels of distortion, smoother responses, more accurate phase control, higher sensitivity levels and greater input source flexibility.

Tannoy Reveal 6 Features:

• For the mid / LF driver magnetic circuit flux control rings and extensive Klippell™ based symmetry analysis has made performance improvement possible, so this all new driver design provides tight, punchy and controlled bass response with a clean and open mid range for superb vocal intelligibility.
• Open and detailed reproduction of mid-high frequencies is further enhanced by inclusion of a WideBand™ high frequency unit to improve and extend the high frequency phase response. This ensures increased tonal accuracy of individual instruments in the reproduction process - a mix critical factor allowing the best EQ and placement decisions to be made.

Tannoy Reveal 6 Specifications:

• PERFORMANCE
• Frequency Response (1) 63Hz to 51kHz
• Recommended Amplifier Power 50 to 100W @ 8 Ohms
• Power Handling Average RMS (2) 50W
• Power Handling Programme RMS 100W
• Nominal Impedance 6 Ohms
• Sensitivity (3) 90dB for 1W at 1m
• Distortion <0.6%
• Crossover Frequency 2.9kHz
• Dispersion (@-6dB) 90 degrees
• DRIVE UNITS
• LF/MID 165mm (6.50") multi fibre paper pulp cone
• WideBand HF 25mm (1.00") titanium dome with neodymium magnet system
• Shielded Yes
• CABINET
• Type Optimised bass-reflex loaded
• Construction MDF cabinet and front baffle
• Tongue and groove front and back
• Finish Grey cabinet with maroon painted baffle
• Cabinet dimensions (HxWxD) 340mm x 210mm x 319mm
• (13.38 x 8.27 x 12.56")
• Shipping dimensions (HxWxD) 622mm x 287mm x 440mm
• (24.56 x 11.30 x 17.32")
• Shipping weight 16 kg
• (35.3lbs)

Get your Tannoy Reveal 6 today!